Can I Use My CPAP Machine in Philippines?

Q: What plug type does Philippines use?

Philippines uses Type A/B sockets at 230V / 60Hz.

Based on what's typical for this device — confirm on the label to be sure.

Typical profile: Check your CPAP machine's label before using it in Philippines.

Check your device label first

Device label unknown: confirm actual INPUT
Destination grid 230⁠V / 60⁠Hz
Plug fit Type A/B fits
Verdict Check your device label first

Device voltage: unknown: confirm actual INPUT
Destination grid: 230⁠V by city / 60⁠Hz
Plug type: Type A/B fits
Typical wattage: 30–90⁠W
Verdict: Check your device label first
Reviewed: 2026-09-30

Next step

What to do next

Read label examplesConfirm what 100-240V, 120V, and 230V labels mean.Re-run with label valuesUse the checker again after confirming 100-240V, 120V, or 230V.Add it to a trip checklistKeep CPAP Machine in a saved packing verdict for Philippines.

Why

Compatibility is unconfirmed. Read the exact INPUT voltage range and frequency on your device or power supply, and compare them with the destination. The whole local range must be covered; 110–220V does not include 100V or 230–240V. Confirm the actual plug, grounding and manufacturer restrictions. Do not plug in while these details are unknown. The cited ResMed and Philips power supplies accept 100–240V, 50/60Hz for the named models. This does not verify your medical device or accessories. Confirm its exact label and manufacturer instructions, including humidifier, approved supply and any travel battery. Do not substitute an unapproved converter or supply.

Philippines runs 230⁠V / 60⁠Hz. DANGEROUS TRAP: the Philippines uses US-shaped Type A/B sockets but its modern nominal supply is 230V at 60Hz (official guidance may show a 220-240V range). A US plug can fit without an adapter, so a single-voltage US device can overheat or catch fire. The plug fitting does NOT mean it is safe.

CPAP Machine in Philippines at a glance

Your CPAP machine vs Philippines's grid
Device voltage profile	unknown: confirm actual INPUT
Typical wattage	30–90⁠W
Destination voltage	230⁠V (220⁠V–240⁠V)
Destination frequency	60⁠Hz
Destination plug types	Type A/B
Voltage mismatch	120⁠V → 230⁠V = +110⁠V
Verdict	Check your device label first

Plug types in Philippines: Type A, Type B

How different input labels change this answer

Calculated examples for reading labels, not a test of your unit. Compare your actual label before using an example result.

Philippines: 220–240⁠V · 60⁠Hz

100–240V 50/60Hz → Conditional compatibility
AC 100-240V ~1.0A 50-60Hz → Conditional compatibility

Sources and limits

What the evidence covers

A source supports only the facts, socket types or models listed below. A model example does not verify every device in its category. Confirm your own label and outlet.

Coverage: ERC: Amended Distribution Services and Open Access Rules; ESCAP/WMO Typhoon Committee: Manila TC57 participant information; ERC: Philippine Distribution Code 2014, 2017 edition
Dataset reviewed: 2026-09-30

Evidence by fact

Nominal voltage: ERC: Amended Distribution Services and Open Access Rules Scope: Philippines distribution utilities and end-users; nominal service monitoring checked: 2026-09-30
Frequency: ERC: Philippine Distribution Code 2014, 2017 edition Scope: Philippines distribution-system users checked: 2026-09-30
Socket types: ESCAP/WMO Typhoon Committee: Manila TC57 participant information Scope: Philippines national visitor guidance (Types verified: A, B) checked: 2026-09-30

Scope

ERC: Amended Distribution Services and Open Access Rules: Signed ERC Resolution 02 Series of 2010, PDF pp1–2; p19/printed17 section 1.3 national applicability; p24/printed22 section 1.7.6 requires every DU to adopt 230 V nominal service voltage for monitoring at meter socket/main service entrance. Alternate nominal standards are reportable to ERC. Its 207/253 V monitoring limits do not verify the stored 220–240 range or every outlet. Official Meralco-hosted regulator original, not a utility-territory extrapolation.
ESCAP/WMO Typhoon Committee: Manila TC57 participant information: PDF p1 author/date; p2 section 8 explicitly names Philippines A/B; p7 PAGASA local organizer. Images cite world-power-plugs.com, not an outlet survey. Its 220 V statement is excluded from the stored 230 V nominal claim; no grounding or guaranteed Type B availability follows.
ERC: Philippine Distribution Code 2014, 2017 edition: ESCAP-hosted scan of the ERC code: PDF p1/p4-p5, Resolution 02 Series of 2018 adopts the 2017 edition (signed 27 February 2018); p17/printed p1 section 1.2.2 covers distribution-system users including utilities and end-users; p45/printed p29 section 3.2.2.1 specifies nominal fundamental frequency 60 Hz. Frequency only; no national voltage or socket claim.

Exact source pending

Philippines DTI/BPS: Mandatory household-appliance testing conditions · Scope: DTI/BPS covered appliance independent testing · checked: 2026-09-30
Section 5.6.2, Independent Testing, requires covered appliance samples to be tested at 230 V AC/60 Hz. These are test conditions, not explicit nationwide grid nominal values; no national supply claim is promoted.
Philippines DPWH: 230 V service and grounded parallel-slot outlets · Scope: DPWH contract 25DM0156 project only · checked: 2026-07-17
Contract-specific grounded equipment/outlet requirements do not establish nationwide installed Type B availability. The 2026-09-30 request returned access-control HTML, so the prior factual checkedAt is preserved. Project requirements remain candidate evidence for a national socket claim.

Sources and limits

What the evidence covers

A source supports only the facts, socket types or models listed below. A model example does not verify every device in its category. Confirm your own label and outlet.

Coverage: CPAP Machine
Dataset reviewed: 2026-09-30

Evidence by fact

Voltage profile: ResMed: AirSense 11 user guide (Profile evidence pending; example only) Scope: ResMed AirSense 11 with 65 W power supply checked: 2026-09-30 ; Philips: DreamStation BiPAP autoSV user manual (Profile evidence pending; example only) Scope: Philips DreamStation BiPAP autoSV with 80 W power supply checked: 2026-09-30
Profile evidence pending; example only
Wattage range: ResMed: AirSense 11 user guide (Profile evidence pending; example only) Scope: ResMed AirSense 11 with 65 W power supply checked: 2026-09-30 ; Philips: DreamStation BiPAP autoSV user manual (Profile evidence pending; example only) Scope: Philips DreamStation BiPAP autoSV with 80 W power supply checked: 2026-09-30
Profile evidence pending; example only
Frequency behavior: ResMed: AirSense 11 user guide (Profile evidence pending; example only) Scope: ResMed AirSense 11 with 65 W power supply checked: 2026-09-30 ; Philips: DreamStation BiPAP autoSV user manual (Profile evidence pending; example only) Scope: Philips DreamStation BiPAP autoSV with 80 W power supply checked: 2026-09-30
Profile evidence pending; example only
Grounding: ResMed: AirSense 11 user guide (Profile evidence pending; example only) Scope: ResMed AirSense 11 with 65 W power supply checked: 2026-09-30 ; Philips: DreamStation BiPAP autoSV user manual (Profile evidence pending; example only) Scope: Philips DreamStation BiPAP autoSV with 80 W power supply checked: 2026-09-30
Profile evidence pending; example only
Safety guidance: ResMed: AirSense 11 user guide (Profile evidence pending; example only) Scope: ResMed AirSense 11 with 65 W power supply checked: 2026-09-30 ; Philips: DreamStation BiPAP autoSV user manual (Profile evidence pending; example only) Scope: Philips DreamStation BiPAP autoSV with 80 W power supply checked: 2026-09-30
Profile evidence pending; example only

Scope

ResMed: AirSense 11 user guide: PDF p25 / printed p22, 65W power supply unit; PDF p26 / printed p23, IEC60601-1 classification: AC 100-240 V, 50-60 Hz, 2 A; DC 24 V, 2.71 A; typical consumption 56.1 W (111.5 VA), peak 73.2 W (137.6 VA), Class II. Supply ratings and consumption are distinct, and neither verifies all CPAP models.
Philips: DreamStation BiPAP autoSV user manual: PDF p61 / printed p57, sections 6.1.5 and 6.1.6: Class II; 100-240 V AC, 50/60 Hz, 2.0-1.0 A with 80 W power supply; DC 12 V, 6.67 A. Follow exact medical-device/approved accessory instructions.

Find the INPUT label first. If the label is missing or unclear, do not plug it in and do not buy a converter on guesswork.

For medical devices, always confirm voltage on the label and check with the manufacturer when in doubt.

Other devices & destinations

Power outlets in Philippines Using a CPAP machine abroad CPAP Machine in Thailand CPAP Machine in Singapore CPAP Machine in Indonesia

FAQ

Can I use my CPAP machine in Philippines?

Typical profile: Check your CPAP machine's label before using it in Philippines. Philippines runs 230⁠V / 60⁠Hz on Type A/B sockets.

Will a travel adapter let me use my CPAP machine in Philippines?

Typical profile: Not by itself. First check the label — if your CPAP machine is single-voltage, a plug adapter will not protect it from 230V.

Do I need a voltage converter for a CPAP machine in Philippines?

Typical profile: First check the label. If it says only 120V or only 230V and that does not match Philippines's 230V, do not buy or use a converter until wattage and local voltage are confirmed.

What plug type does Philippines use?

Philippines uses Type A/B sockets at 230⁠V / 60⁠Hz.

Adapter vs converter explained

Guidance only — not professional electrical advice. Always confirm against your device's label before plugging in. Local wiring (especially in hotels and older buildings) can vary.