Can I Use My Hair Straightener (Flat Iron) in Japan?

Check your hair straightener (flat iron)'s label before using it in Japan.

Check your device label first

Compatibility is unconfirmed. Read the exact INPUT voltage range and frequency on your device or power supply, and compare them with the destination. The whole local range must be covered; 110–220V does not include 100V or 230–240V. Confirm the actual plug, grounding and manufacturer restrictions. Do not plug in while these details are unknown.

  1. Device label varies
  2. Destination grid 100⁠V / 50/60⁠Hz
  3. Plug fit Type A/B fits
  4. Verdict Check your device label first
Device voltage
varies
Destination grid
100⁠V / 50/60⁠Hz
Plug type
Type A/B fits
Typical wattage
25–90⁠W
Verdict
Check your device label first
Reviewed
2026-07-16

Based on what's typical for this device — confirm on the label to be sure.

Caution: The entered input range (110-120V) does not cover the destination rating (100-100V). Confirm the exact outlet and manufacturer rating before use.
Next step

What to do next

Why

Compatibility is unconfirmed. Read the exact INPUT voltage range and frequency on your device or power supply, and compare them with the destination. The whole local range must be covered; 110–220V does not include 100V or 230–240V. Confirm the actual plug, grounding and manufacturer restrictions. Do not plug in while these details are unknown. A US 120V single-voltage straightener on 230V power overheats and can scorch hair or fail. Confirm "100–240V" on the plate, or carry a dual-voltage travel model. Frequency does not affect heating.

Japan runs 100⁠V / 50/60⁠Hz. Japan uses 100V — the lowest standard mains voltage of any developed country. Plugs look identical to US Type A/B, but the lower voltage means even a US 120V device runs slightly weaker. The frequency is split: 50Hz in the east (Tokyo), 60Hz in the west (Osaka). This matters only for motor- and clock-based devices, not for 50/60Hz-labeled chargers.

Hair Straightener (Flat Iron) in Japan at a glance

Your hair straightener (flat iron) vs Japan's grid
Device voltage profilevaries
Typical wattage25–90⁠W
Destination voltage100⁠V
Destination frequency50/60⁠Hz
Destination plug typesType A/B
Voltage mismatch120⁠V → 100⁠V = -20⁠V
VerdictCheck your device label first

Plug types in Japan: Type A, Type B

How different input labels change this answer

Calculated examples for reading labels, not a test of your unit. Compare your actual label before using an example result.

Japan: 100⁠V · 50/60⁠Hz

  • 120V 60Hz 50WCheck your device label first
  • 100–240V 50/60HzConditional compatibility
  • 230V~ 50HzVoltage converter needed
Caution: Find the INPUT label first. If the label is missing or unclear, do not plug it in and do not buy a converter on guesswork.

Other devices & destinations

FAQ

Can I use my hair straightener (flat iron) in Japan?

Check your hair straightener (flat iron)'s label before using it in Japan. Japan runs 100⁠V / 50/60⁠Hz on Type A/B sockets.

Will a travel adapter let me use my hair straightener (flat iron) in Japan?

Not by itself. First check the label — if your hair straightener (flat iron) is single-voltage, a plug adapter will not protect it from 100V.

Do I need a voltage converter for a hair straightener (flat iron) in Japan?

First check the label. If it says only 120V or only 230V and that does not match Japan's 100V, do not buy or use a converter until wattage and local voltage are confirmed.

What plug type does Japan use?

Japan uses Type A/B sockets at 100⁠V / 50/60⁠Hz.

Adapter vs converter explained · Best converter for a hair straightener (flat iron)

Guidance only — not professional electrical advice. Always confirm against your device's label before plugging in. Local wiring (especially in hotels and older buildings) can vary.