Based on what's typical for this device — confirm on the label to be sure.
Typical profile: Your electric shaver needs a plug adapter in Denmark if its actual input rating supports the local voltage and frequency.
Plug adapter needed
Use a plug adapter only after confirming that your actual input rating covers the local voltage and frequency. Match your real plug and preserve any required grounding. An adapter does not change voltage.
Device labeldual
Destination grid230V / 50Hz
Plug fitType K/C adapter needed
VerdictPlug adapter needed
Device voltage
dual
Destination grid
230V / 50Hz
Plug type
Type K/C adapter needed
Typical wattage
5–15W
Verdict
Plug adapter needed
Reviewed
2026-09-30
Caution: Frequency mismatch (device 60Hz vs grid 50Hz): motor speed or timing may change. Verify the label and manufacturer instructions before use.
Use a plug adapter only after confirming that your actual input rating covers the local voltage and frequency. Match your real plug and preserve any required grounding. An adapter does not change voltage. The cited Philips S1103/S1301 supply accepts 100–240V, 50–60Hz and is rated 2W. Other shaver supplies can differ. Read the actual INPUT label and use the specified charging supply; do not assume a single-voltage model permits conversion.
Denmark runs 230V / 50Hz. Denmark runs 230V at 50Hz. Its native socket is Type K, but it also accepts the Europlug (Type C). A Schuko (Type F) plug may not fully ground.
Typical profile: Your electric shaver needs a plug adapter in Denmark if its actual input rating supports the local voltage and frequency. Denmark runs 230V / 50Hz on Type K/C sockets.
Will a travel adapter let me use my electric shaver in Denmark?
Typical profile: Denmark sockets use Type K/C. Yes — you need a Type K/C plug adapter for the shape.
Do I need a voltage converter for a electric shaver in Denmark?
Typical profile: No. If your electric shaver is dual-voltage (100–240V), you don't need a converter in Denmark.
Guidance only — not professional electrical advice. Always confirm against your device's label before plugging in. Local wiring (especially in hotels and older buildings) can vary.