Can I Use My Electric Toothbrush in Denmark?

Q: What plug type does Denmark use?

Denmark uses Type K/C sockets at 230V / 50Hz.

Based on what's typical for this device — confirm on the label to be sure.

Typical profile: Your electric toothbrush needs a converter and an adapter in Denmark.

Adapter + voltage converter needed

Device label varies
Destination grid 230⁠V / 50⁠Hz
Plug fit Type K/C adapter needed
Verdict Adapter + voltage converter needed

Device voltage: varies
Destination grid: 230⁠V / 50⁠Hz
Plug type: Type K/C adapter needed
Typical wattage: 1–5⁠W
Verdict: Adapter + voltage converter needed
Reviewed: 2026-09-30

PlugVoltage sizing estimate: 7W (device watts x 1.25). Both manufacturers must permit the load and startup demand; this estimate is not approval.

Next step

What to do next

Size the converter firstCalculate watts and headroom before buying anything.Read converter guidanceCheck when a converter is reasonable and when it is a bad idea.Add it to a trip checklistKeep Electric Toothbrush in a saved packing verdict for Denmark.

Why

The device profile's voltage and plug differ from the destination. Do not plug in with only a plug adapter: it cannot change voltage. A converter and a plug adapter that preserves any required grounding may be an option only after checking your actual INPUT label, load type, startup demand, frequency and both manufacturers' instructions. Wattage alone cannot establish compatibility; the wrong setup can damage the device or cause a fire. Toothbrush charging bases vary: Oral-B lists 100–240V, 220–240V and 110V/60Hz systems. Check the exact base label and manufacturer travel instructions. A plug adapter changes fit only; use a compatible manufacturer-approved base when the local supply is outside the rating.

Denmark runs 230⁠V / 50⁠Hz. Denmark runs 230V at 50Hz. Its native socket is Type K, but it also accepts the Europlug (Type C). A Schuko (Type F) plug may not fully ground.

Electric Toothbrush in Denmark at a glance

Your electric toothbrush vs Denmark's grid
Device voltage profile	varies
Typical wattage	1–5⁠W
Destination voltage	230⁠V
Destination frequency	50⁠Hz
Destination plug types	Type K/C
Voltage mismatch	120⁠V → 230⁠V = +110⁠V
Verdict	Adapter + voltage converter needed

Plug types in Denmark: Type K, Type C

How different input labels change this answer

Calculated examples for reading labels, not a test of your unit. Compare your actual label before using an example result.

Denmark: 230⁠V · 50⁠Hz

100–240V → Plug adapter needed
220–240V → Plug adapter needed
110V 60Hz → Adapter + voltage converter needed

Sources and limits

What the evidence covers

A source supports only the facts, socket types or models listed below. A model example does not verify every device in its category. Confirm your own label and outlet.

Coverage: Danish Safety Technology Authority: New standard for household sockets; Energinet: Technical issues related to new transmission lines in Denmark; Danish Standards: Plug, socket and voltage information; Danish Safety Technology Authority: Household socket systems; Energinet: Frequency quality parameters
Dataset reviewed: 2026-09-30

Evidence by fact

Nominal voltage: Danish Standards: Plug, socket and voltage information Scope: Denmark (Types verified: C, K) checked: 2026-09-30
Frequency: Energinet: Technical issues related to new transmission lines in Denmark Scope: Denmark checked: 2026-09-30 ; Energinet: Frequency quality parameters Scope: East Denmark (DK2), Nordic synchronous area checked: 2026-09-30
Socket types: Danish Standards: Plug, socket and voltage information Scope: Denmark (Types verified: C, K) checked: 2026-09-30 ; Danish Safety Technology Authority: Household socket systems Scope: Denmark (Types verified: K) checked: 2026-09-30

Scope

Danish Safety Technology Authority: New standard for household sockets: National standard section: new products marketed from 1 January 2026 must meet DS 60884-2-D1:2023, with a limited blind-hole extension transition through 2027. No additional IEC letter types are inferred.
Energinet: Technical issues related to new transmission lines in Denmark: PDF/printed p100, section 6.6 Power quality-related issues: the fundamental frequency of the Danish system is 50 Hz. This national statement is distinct from the older DK2-only Nordic methodology.
Danish Standards: Plug, socket and voltage information: Meeting information > Plug, socket & voltage: Denmark 230 V AC, IEC Type K and Europlug working throughout Denmark. Europlug is mapped to Type C compatibility; this does not establish grounding for class-I appliances.
Danish Safety Technology Authority: Household socket systems: Dansk standard for stikkontakter: traditional Danish, side-earth and pin-earth systems. This page cites DS 60884-2-D1:2017; it does not state 230 V. Current new-product requirements are in the separate 2023-standard source. No new socket families are inferred here.
Energinet: Frequency quality parameters: PDF p5 Article 1 limits this Nordic synchronous-area methodology to East Denmark (DK2), Finland, Sweden and Norway. Article 3 Table 1 states 50 Hz. It is not standalone national Denmark frequency evidence.

Exact source pending

Danish Safety Technology Authority: Permitted household socket families · Scope: Denmark · checked: 2026-07-17
Candidate difference: official guidance describes Type E, Type F, and Danish Type K systems. They are not added as interchangeable nationwide coverage because a listed socket currently means the traveler can rely on that socket being present.

Sources and limits

What the evidence covers

A source supports only the facts, socket types or models listed below. A model example does not verify every device in its category. Confirm your own label and outlet.

Coverage: Electric Toothbrush
Dataset reviewed: 2026-09-30

Evidence by fact

Voltage profile: Oral-B: Can I use my electric toothbrush charger abroad? (Profile evidence pending; example only) Scope: Oral-B market-specific chargers and Smart Plug bases checked: 2026-09-30 ; Philips Sonicare: DiamondClean HX9332/04 specifications (Profile evidence pending; example only) Scope: Philips Sonicare DiamondClean HX9332/04 charging system checked: 2026-09-30
Profile evidence pending; example only
Wattage range: Exact source pending
Frequency behavior: Philips Sonicare: DiamondClean HX9332/04 specifications (Profile evidence pending; example only) Scope: Philips Sonicare DiamondClean HX9332/04 charging system checked: 2026-09-30
Profile evidence pending; example only
Grounding: Exact source pending
Safety guidance: Oral-B: Can I use my electric toothbrush charger abroad? (Profile evidence pending; example only) Scope: Oral-B market-specific chargers and Smart Plug bases checked: 2026-09-30
Profile evidence pending; example only

Scope

Oral-B: Can I use my electric toothbrush charger abroad?: Printed on base table / Additional information regarding adapters/converters: 100-240 V, 220-240 V and 110 V 60 cycles variants; check the base label and destination, and use an approved compatible replacement base. Demonstrates variation, not a generic toothbrush safety clearance.
Philips Sonicare: DiamondClean HX9332/04 specifications: PDF p2, Power > Spannung: 100-240 V, 50-60 Hz for HX9332/04 charging system. This specifications sheet does not establish safety guidance, watts, earth requirements or every toothbrush charger.

Look for "INPUT 100-240V" on the label. If it shows one voltage only, size any converter from the wattage before buying.

Shopping link

External shopping link. PlugVoltage is not currently earning from this link.

See wattage-safe voltage converters

Safety check: a plug adapter only changes plug shape. It does not convert voltage, so confirm your device label before buying.

Shopping links never change the safety verdict.

Other devices & destinations

Power outlets in Denmark Using a electric toothbrush abroad Electric Shaver in Denmark Electric Toothbrush in Sweden Electric Toothbrush in Norway

FAQ

Can I use my electric toothbrush in Denmark?

Typical profile: Your electric toothbrush needs a converter and an adapter in Denmark. Denmark runs 230⁠V / 50⁠Hz on Type K/C sockets.

Will a travel adapter let me use my electric toothbrush in Denmark?

Typical profile: No. A travel adapter only changes the plug shape — it does not change voltage. Your electric toothbrush would still receive 230V.

Do I need a voltage converter for a electric toothbrush in Denmark?

Typical profile: Yes — your device runs on a single voltage that doesn't match Denmark's 230V.

What plug type does Denmark use?

Denmark uses Type K/C sockets at 230⁠V / 50⁠Hz.

Adapter vs converter explained

Guidance only — not professional electrical advice. Always confirm against your device's label before plugging in. Local wiring (especially in hotels and older buildings) can vary.